Forever WaterSlide HT transfer paper

Forever WaterslideHT transfer paper

Forever waterslide ht is designed to transfer printing photo quality images on heat sensitive products such as candle.
Can be use in non-oil based color laser/led copiers and printers.
It is compatible with a wide selection of laser printers and copiers. Our staff tested the Waterslide paper with OKI printers.

Highlighted transfer paper informations:
- Photo quality transfer printing on heat sensitive products
- You can print with a simple cmyk led/laser printer
- You can use without heat-press machine
- East to use:
- High quality colour prints without damaging the surface

How it works?
- You can print the picture/logo onto the transfer paper and place into a water. After the peeling you can position the transfer onto the product.

- You may need to test some settings to find the best setting for your printer.

The application is different for cmyk and cmyw printers.

The White toner printer is printed as last on top of colored toners, the waterslide can only work in a 2-paper system.

The design is printed for the Forever Laser Dark "A" paper and the A paper is pressed together with the Waterslide HT laser transfer paper with Heat press machine.
After the seperation ( cold ) of both papers, the toner transfers to the waterslide papaer, which brings white under the colors.

TRANSFER APPLICATION: CMYW PRINTERS

• Pre-Heat your Press until the lower plate is HOT.

• Print the picture in mirror image onto the FOREVER Laser-Dark (No-Cut) A-Paper.

• Place the Waterslide paper on top of the lower plate and place the A-Paper on the top of the Waterslide paper.

• Cover with a sheet of Matt Finishing Economy.

• Press together at 180°C/352°F with 2 bar/29 psi (medium pressure) for 15 - 20 seconds.

• Separate the Waterslide paper from the A-Paper after it is ABSOLUTELY COLD.

• Cut around the transfer as exactly as possible.

• Place the transfer in water for 30 seconds (The paper will roll up).

• Rub it carefully between the fingers in order to remove the carrier tape.

• Position the transfer onto the application and remove any air bubbles (Use your fingers or a Squeegee).

• Remove leftover water before allowing it to dry for 3 hours.

TRANSFER APPLICATION: CMYK PRINTERS

• Print the unmirrored picture onto the glossy side of the Waterslide HT paper.

• Cut around the picture as exactly as possible.

• Place the transfer in water for 30 seconds (The paper will roll up).

• Rub it carefully between the fingers in order to remove the carrier tape.

• Position the transfer onto the application and remove any air bubbles (Use your fingers or a Squeegee).

• Remove leftover water before allowing it to dry for 3 hours.

Compatible printers
- Can be use in non oil printers
- Lot of other printer brand.You may need to counduxt your own tests !

Tested printers
- Oki led printers

These settings are recommended, you may need to conduct your own tests. All technical information and recommendations are based on tests we have conducted.